Setting up

It was time to enlarge the top of the improvised living room table to make it usable for board games.  I spent some time thinking about building out the cable spool end further, got stuck on how to support the new part from underneath considering the structure of the base, and then remembered that we had some boards that were the right length, and I could just build a whole new table top.  Putting the boards together went quickly; I only had to saw the cross pieces.  The surface is partially varnished from before, and I will probably throw a tablecloth over it when company comes over.

A while back I finished hemming a set of cloth diapers I had cut from a flannel sheet.  The sheet is from a set I bought at a garage sale for $3, and I think I got something like 13 or 14 diapers out of it altogether, including using the pillowcase for a cloth diaper as-is.

I also sewed a pillowcase to actually be used as a pillowcase, from fabric in my stash, and used up most of the thread that kept tangling up in my sewing machine.  It got better-behaved toward the end of the spool.

We had several chairs that needed gluing.  Happily, we have bar clamps now.  When I was done, I had leftover glue, and a pile of sticky bits of fabric I had been wiping up glue with, a wooden skewer that I had been spreading the glue with, and a sheet of paper I had been using to catch drips.  I kneaded the fabric in the glue, arranged it slightly on the paper, stuck the skewer into the center, let it dry, and now I have a fake flower that I can stick out in the window box in the spring.  I'm not sure how the glue will do outdoors, but it should be okay for a while.   

There was a story from one of the local news stations recently about a group that was teaching people how to turn milk jugs into mini-greenhouses:  cut horizontally most of the way around the center, punch a few drainage holes in the bottom, put in soil, plant seeds in it, then close it back up.  My husband has done this before.

Chugging along

I've been doing a lot of organizing and cleaning, and also a little decorating.

The plastic blinds in the kitchen were very bad when we moved in, and I just took them down and bagged them up--I hate mini-blinds too much to spend money on buying new ones.

I finally got around to washing them in the bathtub.  Hot water, dish soap, and spray cleaner had little effect on the thick, tenacious goo that was on them except to soften it a little.  What did work was to scrub with a drippy mixture of baking soda and water.  They came out looking almost new.

To dry the blinds before storing them again, I figured out a way to suspend them from the shower curtain rod by hanging two clothes hangers on it first, and then slipping each end of the top of the blinds into a hanger.

I came out only a little ahead in the end, though, because some little child decided to break one slat, and then another, of the bathroom blinds. I will splint them back together.

----------------------------------

I did a quick decorating project of covering a half-painted canvas--that my husband picked up from some curbside a while back--with fabric, and hanging it on the wall.  I used tacks salvaged from one of my de-upholstery projects.  I put the nail into the wall a little too low, and then compensated by putting a small wooden spool onto the nail before hanging the panel back up.

I used to cover pieces of plywood with fabric, stapled on, and lean them against the wall to hide electrical outlets from the baby, or put them under crates that would otherwise scratch the floor.

-----------------------------------

I looked through the mending bag, and found that I have an even dozen pairs of children's pants waiting to be mended.  I'm going to have to switch thread on the sewing machine.  The thread in it now is very prone to jumping free of the thread guides and creating slack that then tangles down inside the machine.  I was making a quick pillowcase for a seat cushion, and had to pause every few stitches to make sure the thread was behaving itself decently.

The seat cushion was for the deconstructed chair in the library.  I also added one piece of the wood to the back, with short drywall screws, and worked out a way to semi-attach the chunks of redwood beam that it is sitting on to each other, so they're not shifting and letting the chair fall over.

-------------------------------------

In other tinkering, we replaced the light bulbs in a bedroom with ones of a warm color temperature, and found out why the glass shade was on upside-down--it is too small to accommodate full-size light bulbs.  I worked out a way of suspending it a little lower using a bolt, a nut, and a couple of washers, with the bolt running up through the center of the original hanger, and being secured from falling back out with the nut.  It was a three-handed job, and I might go back and add a short tube as a spacer to steady the shade.

Shrunk wool

I have been saving any and all woolen items that shrunk in the wash, for mittens and maybe for a rug.  I did need new mittens, my old ones were from a shrunken lambswool sweater and were wearing right out.

The sweater I used this time had been shrunk three times, two when I first got it to de-oversize it, and then the one unintentional time.  I did the usual--tracing my hand, adding width for seams and for the thickness of my hand and wrist, sewing a zigzag stitch on the line with extra reinforcement at the thumb joint, and then cutting them out.

I found out that they were a little too thick to sew together on the sewing machine, and had to be sewed by hand.  There was about a week where I was wearing mismatched mittens because I hadn't yet sewn the second one.

I also found that it would be better and much easier to leave the seam edges on the outside, and just wear the mittens inside out.  

So, as usual, they came out looking odd, but they are very warm.

--------------------------------

I also went through my smaller and less usable odds and ends of wool, and made a quick mat for boots and shoes.

My idea, based on an entry rug in the store that I almost bought some time ago, was to attach wool "rocks" to a backing.  For the backing, I used some synthetic felt that I had.  It was black, so I was looking for something to go over it.

Having my fabrics sorted by size turned out to be a good idea.  I quickly found several in my medium-size drawer that could be used for a sort of shoreline, and quilted them over the backing.

Since it was to be a mat, I allowed some of the cut "raw" edges of the fabrics to show, and only made the mat's edges neat.  I also allowed the fabrics to not always lie flat on the backing, to simulate shallow water.

Cutting out the "rocks" from the different wools was fun.  Many of them looked a lot like rocks that I've collected.

For attaching them, I used some old craft glue I had.  It is water-based, but also fairly water-resistant when dry.  If it is not enough, I can sew things together later.

It seemed best to brush a layer of glue over the back of each "rock", and then add a few more dabs of glue to engage with the backing.

It turned out well enough, aside from me not noticing until it was finished that I had forgotten to cut the backing to the width I wanted--!!  The glue stiffened the mat a lot, but it bends enough to fit on the shelf I made it for.

------------------------------

I have a running question in my head about how long I can go before my household starts to be afflicted with wool-eating moths, as seems to have been usual before synthetic fibers.