Assembly lines

Every year I try to make some kind of a homemade Christmas ornament for each child, that they will be able to take with them when they grow up.

This year I took a torn-off notebook cover that was foil-printed with a abstract design, cut out shapes from it, and backed them with aluminum foil.  I embossed the backs using a small glass bottle that had a ring of little dots around its base.  Then I ran them through the laminator--just because I could--made holes with an awl, and put strings through them.  I didn't have enough string, really, and it was too thick, but I was able to partially separate the strands and turn it into four thinner strings.

For another project, I've been working on sewing up a bunch of pieces of cotton, some of them very small.  I was stuck for a long time, until I decided to adopt a simpler and more modular scheme for cutting them and putting them together.

I took a piece of paper, folded it in half, and tore it along the fold.  I did the same thing with one of the halves, and then again with one of the new halves.

I ended up with three pieces of paper:  one at full width, one at half-width, and one at quarter-width.  These became width templates, although I had to remember to always add extra for seam allowances.

With the templates, I was able to cut the fabrics according to the widest template that would work, and on to the smaller ones from there with the remaining scraps.

In putting them together, I worked from the narrowest pieces to the widest:  make a long strip of the narrow pieces, find the middle, and cut it there.  Put the resulting two strips side by side and sew them together.  Then add medium-length pieces on to the end, making another long strip, find the middle again again, and cut and join the two side by side again.  Then add the widest pieces.     

The largest pieces of fabric I set aside, but now I'm at the point where I need to know how much longer the strips (I have four, in different color schemes) need to be.  

That means I'm stuck again, waiting for my laundry helper to wash the blankets I'll be using as quilt batting.

A fake bowl for the fake flowers

 I finished the coffee filter hydrangeas that I was making. Since I was using paper and paint instead of coffee filters and food coloring, I found that I had to paint each side of each cutout separately. And I air-dried them, instead of using an oven at low heat.

When I bundled them together, I just used a paper clip at the bottom of each bunch, and left the leaves loose. I have some spools of fine wire, but I didn’t need them.

With the flowers finished, I looked around the house for a good bowl to put them, but didn’t find anything suitable. So I ended up taking paperboard from a saltine box, and using strips from it to make a “bowl”.  The quotation marks are because it has no bottom, and is actually only a ring.

I made it by taking two long sides from the box, and making interlocking slots at each end. Putting them together made a shape that was more like an eye than a ring, so I did the same thing with the other two long sides of the box, and slipped the second eye inside the first, rotating it so that the whole thing was reasonably round.

I glued on some scrap paper to cover and hold down the protruding tabs, then I painted the outside with craft paint. The unprinted side of the paperboard soaked up most of the water in the paint, so I did the second coat right away, and from there went straight into applying white puff paint in a geometric design.

The puff paint dried with a shine, while the craft paint didn’t, and the shine contrasts with the non-shiny flowers, so I’m glad I used the puff paint, even though it did run downward a little on the vertical surface. Otherwise, I would have added a coat of something clear like Mod Podge for shine, since the bookshelf the bowl is going on has almost nothing shiny on it, and could use a little sparkle.

Mobile

I had a room that needed a little something along the lines of a chandelier to hang in it. I ended up making a mobile to hang from the light fixture:

Materials:  paperboard, paper, paint, wire. Tools:  pencil, scissors, paintbrush, needlenose pliers. The ball in the middle is a sheet of paper that I crumpled, wet, and kneaded...basically a large spitball. I left the edges of the paperboard rough and didn't try hard to evenly space the circles.

The mobile's shape is based on a mobile that my grandma had at her house; hers was black and red, and smaller. The form is also vaguely (and inaccurately) atomic, which ties in with my physics background.  The mobile catches the light from the high windows well.

Boxes

I did a lot of little moving-preparation tasks this morning, and used up all of my ambition and energy. But I did play around with making boxes out of some large pieces of paperboard that I don't want to move.

The first idea I had was to coil a long strip into a circular box, and poke holes through it to secure it with yarn. But really I wanted a rectangular box, for more economical use of space.

A rectangular box is simple:  four sides, a bottom, and maybe a top. I cut a long strip and folded it to form the four sides, plus some overlap. I stapled this in place. Then I cut another long strip, which became another layer of a side, then the bottom, the opposite side, the top, and a flap. I stapled this in place, too, and I was done. I am leaving it plain and undecorated.