Monday, March 13, 2023

Hard at work

Lots of projects going on around here.  I built a long, rustic bench for kitchen table seating.  I planned it down to the last inch to fit the space and the things I wanted to store under it, then had to root around in the depths of the garage to find all of the wood and hardware that I needed.  The seat is a plank from a waterbed frame.  Several of the other long boards were previously salvaged, attached to stakes, and used as flower bed edging at our old house.  Those needed washing, and were somewhat warped. 

I never did find the box of nails that I was planning to use.  I improvised with bolts and screws that we already had.

I used our drill press to drill some of the bolt holes, and used hand tools for everything else.  There was a pause of about a week with pieces of wood stored under the kitchen table while I thought about how to make a back for the bench.

In the process of building the bench I learned, or re-learned, that I could use nails as easily-removable probes and alignment pins when I was having trouble lining up the pilot holes for screws.

The bench still needs some kind of a finish, particularly on the seat, but I am waiting for warm weather and good ventilation.

--------------------------

I have also been doing a lot of mending of pants' knees, still have two or three more pairs to go.  Some of the pants are lined, so I can't do my usual method of attaching the patch to the leg seams on the inside, and then stitching the ripped area to the patch.

--------------------------

I made a belt for a child, complete with a buckle made from coat hanger wire and some sort of a legged spring that I salvaged at some point.  That involved some work with a metal file, not just rounding off the sharp ends, but also filing a deep groove into the wire as a way of cutting it.  I like file work a lot, and I should find an excuse to do more of it.

After I finished the belt, I picked up a leatherworking book from the library.  It turns out there are specialized punches for cutting the slot for the tongue of the buckle, and for rounding the end of the belt, and for making the other holes.  I used kitchen scissors and knives that I had, along with a nail for an awl, and an old preschool-level workbook as a surface that could be nailed into.  I also used waxed thread instead of rivets.

No comments:

Post a Comment