Stocking up again

Some things my family has been acquiring lately:

more than a pound of beeswax

rawhide dog bones on clearance -- I'm experimenting with soaking, reshaping, and drying them

Finnish woodcarving knives, assorted chunks of wood, and several used clamps (my husband)

regular and flannel all-cotton sheets and someone's leftover quilting fabric -- for clothing, diaper, and quilt projects

used work boots that turned out to have been oiled far beyond their oil-resistance -- a resoling project for me to try out attaching a sole using maple pegs instead of glue

used bicycle wheel -- child wants to build a spinning wheel

glass prism to hang in a window

musical instruments -- an old trumpet, a quite nice thrift store open-hole flute that I can "grow into", a homemade oboe-like instrument, and a small pennywhistle

books -- homeschooling, practical skills, literature

cast iron cornbread pan

crochet cotton

Fiddling around

I've been chugging through a bunch of projects.  I converted a glider rocker with a broken mechanism to a normal rocker, using runners (?) saved from a handed-down family rocker that my children did in, complete with chewed-up ends from the family dog of the time.  I took off the lower level of the glider rocker, and bolted on the runners, after some shaping with a drawknife to remove projecting corners--which was complicated by the discovery of brads that were securing the rocker's cross pieces.  I worked around the brads until I could pull them out, pulled them, and then put them back in when I was done.

The finished rocker sits low and mostly rocks forward.  The runners are worn almost flat in the middle, and the rocking action is clunky.  It occurs to me that some more draw knife work might help there a lot.

Out in the yard, I put down some free leftover ceramic tiles interspersed with a set of marble coasters from a yard sale along a path in the garden, and then made a endpoint by putting down a slice of tree trunk.  The kids brought home three bins of these from a woodworker.

I started turning another tree trunk slice into a stool that can be shoved under the kitchen table, and found that all my drill bits of the right size for drilling pilot holes are getting very dull.

At that point, the family illness-of-the-week caught up with me, and I had to switch to less-strenuous projects:  finishing the embroidery on a tea towel, making more towel loops for the bath towels, taking the lace and worn spots off a vintage linen towel to make it usable, and stitching around the edges of my favorite bath towels so they don't fray.

I've also been enjoying my recent garage sale purchases, which include a little tin xylophone with brass bars that resound for several seconds when struck, and a student-grade violin, which I bought for $20 without even really looking at it, because I knew I still had my violin set-up CD from my previous sabbatical, when I made a fiddle from a kit.  The violin turned out to be in decent condition, just some scratches and stickers.  My husband found a guitar tuner, and I got it tuned up.  Then of course, I had to compare it with the fiddle.  The fiddle sounds better, part of which may be that it is just larger.  I found out that I need my bifocals to see where I'm bowing and fingering at the same time.

Lawn chair, lawn chair, chairs, armchair

I finished the first lawn chair, with a pause of a day to grow some more muscle for pushing the awl and for driving screws through fabric that constantly wanted to twist.

There was some fiddly work that went into each connection.  I'd looked through our hardware hoard, and I have a few T-shaped pins from a retired lawn chair, with the "T" being as wide as a strip of webbing, which is wrapped around it, and then the short stem of the "T" is inserted through the webbing and into the chair frame, and holds the webbing in place while spreading out the strain and neatening the ends.

For a similar effect, I used a strip of milk jug plastic for the wide part of the "T", and a screw, with a washer, through it for the stem.  I think the plastic will not hold up that well in the longer term, but it's good enough for now, and I could be wrong since the fabric will protect it from the sun a lot and my lawn chairs are in the shade for most of the day.

With the second chair, the connectors were short bolts that ran through grommets in the ends of the webbing--which were carefully folded into points.  My fabric wouldn't fold down that far, so I did basically the same thing as the first chair, but I saved the grommets and re-used them as washers.

Most of the assembly happened outdoors, and the work for the second chair was spread over three days; it had more bands than the first chair.

The finished lawn chairs have been holding up so far.  They look nice, except for the one chair's arms still being deteriorating plastic.  Which I will probably replace with wood at some point.

I have three other chair projects, and a table project, lined up indoors.  One of them is a tapestry armchair a child bought at a yard sale, which needs major repairs on the springs.

Lawn chair webbing, and other maintenance

I was experimenting this morning with ironing layers of milk jug plastic together--with a layer of baking parchment paper to protect the iron--in the hopes of making a solid enough material for a lawn chair seat.

I gave up after a while.  The plastic bonded poorly, tended to warp and wrinkle, and was rather brittle after it cooled down.

Next idea:  use a big piece of synthetic upholstery fabric to make "giant bias tape"--bands of folded fabric, only with the fabric cut with the grain instead of diagonally as done with real bias tape--and then to use the bands as webbing.

I figured a triple thickness of the fabric would be enough.  I now have the bands cut and the "raw" edges secured with stitching.

The next step, and the hardest one, will be to attach these to the chair frame so that the connectors don't tear out.

----------------------

In other work, I managed to pull off the hot glue that I had used to winterize my bedroom window.  Last summer it was on there very firmly, but a second year of temperature changes weakened the bond a lot.  So now I can open the window.

-----------------------

We've been around to a number of neighborhood yard sales, and we found many useful items, in particular jeans and work pants for teenage boys, and several pairs of shoes that fit me and a child.  I had been in a mall shoe store not long before, where there were practically no acceptable shoes, so it was very timely to find the yard sale shoes.

------------------------

I finally got to a leather store, and bought some utility leather for re-covering indoor chair seats.  I've learned from a previous attempt that fabric store vinyl is much less durable than the original vinyl.  If the leather doesn't survive, I'm going to use steel plate.

Putting the leather on took a while, mostly in trying to wrap it gracefully around the corners, given that the leather was too thick to have more than two layers of it on the underside of the seat.  I used carpet tacks from the home improvement store, which worked fine.

Rather a surprise

 One of the washcloths that I made from an old skirt is now threadbare to the point of developing holes.  What I noticed is that the areas that happened to be embroidered from when it was a skirt are not nearly as threadbare; the fabric density there is about double that of the undecorated portions, not including the embroidery yarn and thread--which were stitched as a yarn embroidery "couched" or stitched down with buttonhole thread.

So the embroidery has done a lot to protect the fabric from abrasion, mostly during washing, and has also helped to contain the fibers so they don't work their way out of the fabric.

Shorts

I used some of the yard sale fabric--a thin cotton throw and a 25-cent flouncy linen skirt--to make a couple of pairs of shorts for myself, to wear under skirts.  I also shortened a pair of pajama pants into shorts.  Partly by hand sewing, partly by machine; hand sewing is much easier to take outside.

I also made a small beginning on the skirt I am planning to make out of cotton T-shirt scraps.  Just two pieces of fabric, backstitched together with a couple of outlined shapes, and then cut out the top layer within the stitching (reverse applique, a la Alabama Chanin).  I need to go back and re-stitch with buttonhole thread, which is much more durable.

Branching out

I set up the big willow basket, found an old smoker lid to turn upside down for a planter inside it, and then I set up a stack of hardwood pieces from old armchair innards as a base for the smoker lid.  I ended up filling it with water toys, and not dirt, though.  

We had a yard sale, and did poorly money-wise, besides my mother-in-law buying two willow wreaths that I had made, and one child running a lemonade stand that did well.  Child charges 25 cents per cup, but many people pay with paper money and say to keep the change.  With the yard sale, the problem was mostly that we didn't have a lot of stuff to draw people in.

We went to a number of yard sales ourselves, and found some useful items.  Children bought fishing equipment and a large vintage crank-driven ice-cream maker.  I bought an oak table, boxes of nails, and some tools.  At free piles we found some fabrics, greeting cards, and books.